Ford > Transmission > Torque Management

General

• Trans Torque Reduction Master: Master enable/disable for all transmission torque reduction.
• Trans Shift Torque Reduction: Master enable/disable for transmission shift torque reduction.
• Trans Shift Torque Reduction ECT Min: Below this ECT, transmission shift torque reduction will be disabled.

Torque Truncation

• Trans Torque Truncation: Master enable/disable for transmission torque truncation(limiting).
• Trans Torque Truncation vs. Gear: This is the maximum torque allowed into the transmission before limiting occurs.

Torque Reduction Upshift

• Trans Upshift Torque Reduction 1->2: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.
• Trans Upshift Torque Reduction 2->3: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.
• Trans Upshift Torque Reduction 3->4: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.
• Trans Upshift Torque Reduction 1->3: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.
• Trans Upshift Torque Reduction 1->4: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.
• Trans Upshift Torque Reduction 2->4: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.

Torque Reduction Downshift

• Trans Downshift Torque Reduction 2->1: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.
• Trans Downshift Torque Reduction 3->2: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.
• Trans Downshift Torque Reduction 4->3: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.
• Trans Downshift Torque Reduction 4->2: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.
• Trans Downshift Torque Reduction 4->1: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.
• Trans Downshift Torque Reduction 3->1: This ratio is the amount of desired torque during the shift. Values lower than 1.0 will reduce torque during shifts.