Ford > Speedometer > Speedometer

General

• Final Drive Ratio:
• Tire Revs per Distance:
• Trans Output Pulses/Rev: Number of pulses per revolution for the Transmission Output speed sensor. Usually the number of teeth on the sensor.
• Final Drive/Tire use VID: When enabled the Final Drive(Axle) ratio and Tire Revs per Distance will use the values stored in the VID block.
• VSS out via SCP: Master enable/disable for VSS output signal to be sent over the SCP network.
• VSS out via PCM: Master enable/disable for VSS output signal via PCM output.
• N/V Base: The base RPM/MPH value for the vehicle. When in 1:1 gear(eg. 3rd) this is the Engine RPM divided by the speed in MPH.
• N/V Max Learned: This is the minimum learned value for N/V
• N/V Min Learned: This is the maximum learned value for N/V
• N/V Multiplier: